P.O. Box 17062 CLEARWATER, FL 33762
PH. 1-727-789-5786 FAX 1-727-572-9926
PH. 1-727-789-5786 FAX 1-727-572-9926
www.floridawaterblast.net
Search for Products
WARRANTY
... Hydro Engineering Warranty Policy
WARRANTY
NINETY DAY LABOR:
This limited warranty includes labor for a period of ninety (90) days from the original
purchase date. Labor is provided on the replacement and/or repair of parts covered by
this limited warranty only. Labor is not covered for replacement of parts considered
as wear items or items rejected under the terms of his limited warranty.
LIFETIME PARTS:
Some parts supplied on our equipment carry a lifetime limited warranty such as; forged
brass pump manifolds, supplied by General Pump Company, they are warranted uncon-
ditionally, including freeze damage. These pass through warranties are subject to change
by their manufacturer. Please consult our service department for the most recent warranty
terms on these items.
FIVE YEAR PARTS:
This applies to all proprietary parts manufactured by Hydro Engineering, Inc., such as
equipment frames, Hydropads, stainless steel equipment covers, panels, guards, coil
wraps, and fuel tanks.
FIVE YEAR PRORATED:
Hydroblaster heating coils are covered for full repair or replacement during the first two
years; customer pays 40% of replacement cost during third year, 60% during fourth year
and 80% during the fifth year.
ONE YEAR MINIMUM ON PARTS:
All other components will be warranted based on the original component manufacturer’s
limited warranty. All carry a one year minimum term. Normal wear items as described
below are excluded.
PASS THROUGH REPLACEMENT PARTS WARRANTY:
Many components such as pumps, motors, engines, etc., may be warranted by their
respective manufacturers and are serviced through the manufacturer’s local authorized
service centers. Hydro Engineering, Inc. is not authorized to provide warranty on many
of these items, but will help you contact and expedite the warranty process with the
authorized service centers.
EXCLUSIONS:
This limited warranty includes labor for a period of ninety (90) days from the original
purchase date. Labor is provided on the replacement and/or repair of parts covered by
this limited warranty only. Labor is not covered for replacement of parts considered
as wear items or items rejected under the terms of his limited warranty.
LIFETIME PARTS:
Some parts supplied on our equipment carry a lifetime limited warranty such as; forged
brass pump manifolds, supplied by General Pump Company, they are warranted uncon-
ditionally, including freeze damage. These pass through warranties are subject to change
by their manufacturer. Please consult our service department for the most recent warranty
terms on these items.
FIVE YEAR PARTS:
This applies to all proprietary parts manufactured by Hydro Engineering, Inc., such as
equipment frames, Hydropads, stainless steel equipment covers, panels, guards, coil
wraps, and fuel tanks.
FIVE YEAR PRORATED:
Hydroblaster heating coils are covered for full repair or replacement during the first two
years; customer pays 40% of replacement cost during third year, 60% during fourth year
and 80% during the fifth year.
ONE YEAR MINIMUM ON PARTS:
All other components will be warranted based on the original component manufacturer’s
limited warranty. All carry a one year minimum term. Normal wear items as described
below are excluded.
PASS THROUGH REPLACEMENT PARTS WARRANTY:
Many components such as pumps, motors, engines, etc., may be warranted by their
respective manufacturers and are serviced through the manufacturer’s local authorized
service centers. Hydro Engineering, Inc. is not authorized to provide warranty on many
of these items, but will help you contact and expedite the warranty process with the
authorized service centers.
EXCLUSIONS:
1. Normal service and wear items, such as oil filters, fuel filters, nozzles, guns,
wands, quick disconnects, o-rings, seals, packing, valve or valve assemblies,
water filter cartridges, belts, brushes, discharge hoses, oil skimming belts,
filter media, ozone bulbs, etc.
2. Damage or malfunctions resulting from accidents, abuse, modification, altera-
tions, incorrect installation, improper servicing, failure to follow manufacturer’s
maintenance instructions, or use of the equipment beyond its stated usage
specifications as contained in the operator’s manual.
3. Freeze damage, chemical damage, scale/hard water build up, rust, corrosion,
or excessive heat.
4. Damage resulting from inadequate electric, water, venting or fuel supplies.
5. Normal maintenance service including tune-ups, fuel system cleaning, and
cleaning of obstructions in fuel or water lines.
6. Freight damage resulting from shipment.
7. Field labor and transportation (mileage) charges for onsite service calls.
ACQUIRING WARRANTY SERVICE:
To acquire warranty service, you must return the product to your Authorized Hydro
Engineering, Inc. Dealer, freight prepaid, with proof of purchase date within the appli-
cable warranty period. If the product is permanently installed, you must notify your
Authorized Hydro Engineering, Inc. Dealer of the defect. Your Dealer is authorized to
file a claim with Hydro Engineering, Inc. Ground freight charges on warranted replace-
ment parts will be paid by Hydro Engineering Inc. For warranty service on components
warranted by other manufacturers, your Authorized Hydro Engineering, Inc. Dealer
can help you obtain warranty service through the manufacturer’s local authorized ser-
vice centers.
LIMITATION OF LIABILITY:
Hydro Engineering, Inc. shall not be liable for special, incidental, or consequential dam-
ages and therefore these damages are expressly disclaimed. Hydro Engineering, Inc.’s
liability limit under this limited warranty shall not exceed the purchase price of the pro-
duct in question. Hydro Engineering, Inc. makes every effort to ensure that all illustra-
tions and specifications are correct, however, these do not imply a warranty that the
product is merchantable or fit for a particular purpose, or that the product will actually
conform to the illustrations and specifications. THE WARRANTY CONTAINED HERE-
IN IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
ANY INPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, INCLUD-
ING WASTE-WATER TREATMENT.
Hydro Engineering, Inc. does not authorize any other party including authorized Hydro
Engineering, Inc. Dealers, to make any representation or promise on behalf of Hydro
Engineering, Inc., or to modify these terms, conditions, or limitations in any way. It is
the buyer’s responsibility to ensure that the installation and use of Hydro Engineering,
Inc. products conforms to local codes.
LIMITED WARRANTY COVERAGE:
Products manufactured by Hydro Engineering, Inc., are warranted to the original pur-
chaser to be free from defects in materials and workmanship under normal use for
specific periods. This Limited Warranty is subject to exclusions, is calculated from
the date of the original purchase, and applies to the original components only as
shown below. Any parts repaired or replaced under this warranty will fall under that
parts limited warranty.
Products manufactured by Hydro Engineering, Inc., are warranted to the original pur-
chaser to be free from defects in materials and workmanship under normal use for
specific periods. This Limited Warranty is subject to exclusions, is calculated from
the date of the original purchase, and applies to the original components only as
shown below. Any parts repaired or replaced under this warranty will fall under that
parts limited warranty.
NEW PRODUCT LIMITED WARRANTY
Applies to all Hydro Engineering Inc. Equipment
Contact Us
FLORIDA WATER BLAST, INC. Clearwater Florida Ph. 1-800-966-0614
